Products

  • This package includes a pair of our high quality Nipple Cylinders, a Deluxe Pump with Gauge and T Connector. Everything you need to begin nipple pumping. Numbers on the drop down menu's represent inner measurements of diameter and length. 
  • Thickwalled Penis Cylinder

    $98.95$108.95
    Our new Thick-walled Cylinder is over two times thicker than our regular cylinders. This cylinder is best for men with Erectile Dysfunction since there is no rim to get in the way of using a restriction ring. The bottom is hand finished for ultimate a comfortable and snug fit. The cylinder seals easy and tight against the pubic area providing an easier work out and much faster length gain results. You can use a restriction ring for maintaining your erection for erectile dysfunction. Both experienced pumpers and beginners have remarked about their positive experience and faster growth. Numbers on the drop down menu's represent inner measurements of diameter and length. 
  • This is our staple product. Our Regular Penis Enlargement Cylinder fits comfortably with our custom base. We use a unique process which results in a better seal and greater comfort. Please check out this brief video explaining the importance of sizing yourself properly.  Cylinder size page is HERE This cylinder works equally well for beginning and advanced pumpers.
    • Hand crafted, diamond cut, flame polished cylinder
    • Comfortable & Easy to use
    • Designed for easy vacuum seal without the use of awkward rubber gaskets
    • Includes a quick connect/disconnect safety valve that maintains the vacuum after you disconnect the pump
    NOTE: This product does not include a hand pump or hose!! You may order one here. (The hose is included with the pump.) In compliance with state health laws, penis enlargement cylinders are not returnable, so size them carefully. Also, any cylinders over 12" in length take a few days to make and cannot ship same day. Numbers on the drop down menu's represent inner measurements of diameter and length.   
  • Our new Elliptical Thick-walled Cylinder is over two times thicker than our regular cylinders. The shape is elliptical and has a short side and a longer side. The diameter you choose is the SHORT SIDE, NOT LONG. The cylinder will vary in size slightly because they are hand formed.  This cylinder is best for men with Erectile Dysfunction since there is no rim to get in the way of using a restriction ring. The bottom is hand finished and flame polished for ultimate a comfortable and snug fit.  You can use a restriction ring for maintaining your erection for erectile dysfunction. Both experienced pumpers and beginners have remarked about their positive experience with this cylinder. Currently only available in 9 inch lengths Numbers on the drop down menu's represent inner diameter and length. Cylinder thickness: 1/4"
  • Our Elliptical Penis Cylinder "Wide Body" cylinder is the most anatomically correct penis cylinder on the market today. The shape of each cylinder is oval like the natural shape of your penis. We are the original maker of this exciting new cylinder and no one has copied us successfully. The shape is elliptical and has a short side and a longer side. "What is the difference between round and elliptical cylinders?" The primary difference pertains to the shape. Feedback received from customers indicates an accelerated girth expansion. This observation is consistent with my personal experience when I used this cylinder personally some years ago. During the manufacturing process, our approach was geared towards enhancing the cylinders' anatomical shape. The objective was to facilitate a swifter horizontal traction of the tissue. It is important to note that our standpoint predominantly derives from customer insights and individual experimentation. Regrettably, we lack substantive empirical data or visual documentation to substantiate these claims. In the broader context, it is noteworthy that both cylindrical forms, namely round and elliptical, yield satisfactory outcomes with respect to both length and girth augmentation. This assertion, of course, hinges on the prerequisite of selecting a cylinder of appropriate dimensions in alignment with one's erect circumference.   The diameter you choose is the SHORT SIDE, NOT LONG. The cylinder will vary in size slightly because they are hand formed. Numbers on the drop down menu's represent inner measurements of diameter and length.  This cylinder works equally well for beginning and advanced pumpers.
    • Hand crafted, diamond cut, flame polished cylinder
    • Individually hand crafted to several width specification - sizes provided at checkout
    • All cylinders are available in 9 and 11 inch lengths only.
    • Comfortable & Easy to use
    • Designed for easy vacuum seal without the use of awkward rubber gaskets
    • Includes a quick connect/disconnect safety valve that maintains the vacuum after you disconnect the pump
     
    Our Size Short Side Longer Side
    1 1/2" 1 1/2" 1 7/8"
    1 3/4" 1 3/4" 2"
    2" 2" 2 1/2"
    2 1/4" 2 1/4" 2 11/16"
    2 1/2" 2 1/2" 2 7/8"
    NOTE: This product does not include a hand pump or hose!! You may order one here. (The hose is included with the pump.)
  • Sold in pairs, our nipple enlargement cylinders are designed to increase the size of your nipples while at the same time increasing sensitivity.
    • Makes nipples larger & more sensitive
    • High quality construction
    • Comfortable & easy to use
    • Airlock-release valve retains vacuum when disconnected from the pump, leaving both hands free
    • Available in 5 sizes:  1/2 inch, 5/8 inch, 3/4 inch, 1 inch, 1 1/4 inch (perfect for those with pierced nipples)
    • Approx. three inches (7.6cm) in height
    • Numbers on the drop down menu's represent inner measurements of diameter and length. 
    Order our Buddy T-Hose Connector with your Nipple Cylinders to assure equal vacuum in both cylinders for even nipple growth. NOTE: This product does not include a hand pump or hose!! You may order one here. (The hose is included with the pump.)
    These cylinders are not returnable, so size them carefully.
  • Out of stock
    This product is ONLY for advanced pumpers! Our Foreskin Restoration Cylinder was developed to allow you to stretch your foreskin and can be used by those with NO foreskin and for those with existing foreskin.  Over time repeated expansion of the foreskin tissue results in permanent foreskin enlargement. Please note these cylinders are hand formed so the flared end numbers are approximate.
    • Inside Diameter (internal) = 1 3/8”
    • Inside Diameter (flared end) = 1 3/8”
    • Outside Diameter = 1 1/2”
    • Outside Diameter (flared end) = 1 5/8”
    • Overall Length = 4 ½”
    • Ball Diameter = 1 ¼”
    NOTE: This product does not include a hand pump or hose!! You may order one here. (The hose is included with the pump.)
  • Our Anal Pump Cylinder consists of a small diameter cylinder with a rod running down the center and extending outside the cylinder. You lube the rod and the end of the cylinder (use a good thick lube to provide a good seal), slide the rod into your anus until the end of the cylinder presses against your anus, and start to pump!
    • Available in only one size.  It is 6.5" long and 3" in diameter, and the rod is 10" long and 1" thick.
    • May be difficult to use this cylinder is very difficult to use by yourself. It is much easier to use with a partner.
    NOTE: This product does not include a hand pump or hose!! You may order one here. (The hose is included with the pump.)
  • Our Vulva Cylinder is hand crafted in the U.S.A and made of the finest, industrial strength crystal clear acrylics. The latest rage... swollen lips! These are the lower "love lips"... the labia and vulva. And this is just what everyone's been looking for! These are designed for comfort and long life usage!
    • Three sizes available
    • Tapered toward the top to match the natural shape of your anatomy for maximum comfort
    • State-the-art air valve which allows for quick and easy disconnection from the pump while maintaining pressure within the cylinder.
    • No gaskets are required.
    • Numbers on the drop down menu's represent inner measurements of diameter and length. 
    Through a strong vacuum, you can increase the amount of blood flow to your vagina. Due to different physical makeup's you may need to adjust the cylinder so you can get a tight seal around your vaginal area. NOTE: This product does not include a hand pump or hose!! You may order one here. (The hose is included with the pump.) These cylinders are not returnable, so size them carefully.
  • Our Clitoral vacuum cylinders offer intense stimulation and growth potential. Main features:
    • Through suction play, you can enjoy the pleasurable vacuum sensation
    • Temporarily enhances sensitivity for improved sexual play and masturbation
    How it works: With proper use you can enlarge and stimulate your clitoris using our vacuum pump. They utilize the same concept as traditional penis pumps, which have been effective in enlarging penis size, now you can enlarge your clitoris size. The cylinder is crafted from industrial grade clear acrylic. This cylinder uses the same airlock release system as in our penis pumps. Enjoy watching your clitoris grow with proper use. Pumping your clitoris enhances its sensitivity and can be a lot of fun for sexual play and masturbation. Clitoris cylinders can also be used to create great stimulation or punishment with higher pressure levels. NOTE: This product does not include a hand pump or hose!! You may order one here. (The hose is included with the pump.) The image is a representation of the size range. You will receive (1) Clitoris cylinder when ordering.
    • Approx. three inches (7.6cm) in height
    These cylinders are not returnable, so size them carefully.  All cylinders diameters are INNER DIAMETER measurements  
  • Our Isolator Cylinder has been designed with separate chambers for your penis and balls, with different levels of vacuum pressure, pulling your penis up and out, and pulling your testicles away from the body. This special cylinder is made with three chambers and two valves. The most important measurement is for the penis chamber, in order for this cylinder to work to its fullest, you must be able to fill the penis chamber from side wall to side wall. This cylinder will not fit if you are less than seven inches in total erect length and have a penis and ball circumference of ten inches or above. Also, our Silicone Cylinder Cusion does not fit on this cylinder. The opening for this cylinder is ALWAYS 3" I.D. This cylinder is best suited for guys 7.5 inches in erect length and above. After you fill the penis chamber a second valve allows for adjusting of pressure in the chamber filled with your testicles, when pressure is increased in the testicle chamber it pulls your testicles forward pulling them away from the body. Measurements will be provided at checkout. This special cylinder will take up to 7 business days to manufacture! NOTE: This product does not include a hand pump or hose!! You may order one here. (The hose is included with the pump.)
  • Our Mushroom Head Cylinder is the perfect enlargement tool for developing a larger penis (glans) head. This 2 stage cylinder is designed so that the penis shaft can expand only to its normal size in the bottom first stage while the penis head can expand much larger in the upper top 2nd stage.  Since the penis head is a difficult area to enlarge this cylinder is highly recommended for exactly this purpose. Please note; this is a highly personalized made cylinder and if you choose any express shipping options your order WILL NOT ship the same day you place your order. Your order will ship when your Mushroom cylinder is ready; usually 5-7 business days after order receipt. Also note; I can only make diameters in quarter inch increments. (ie, 1.5, 1.75, 2, up to 2.5. Nothing past a 2.5" diameter)
    • Vacuum pressure is concentrated mainly on the penis head which allows for maximum expansion of this area.
    • When ordering please provide the measurements to allow us to custom size the cylinder to fit your penis. IF YOU ARE ALREADY A "PUMPER" measure your PUMPED erect shaft length and total length. 
    • The 2nd stage (where your glans goes into) is a standard height and diameter, it is not customizable.
    • The 3rd number I ask for is to basically test your measurements. For example, you enter 4.5" for your shaft but then enter a 9" total length. Something would be off here; you cannot have a 4.5" high/long glans. I need YOUR total erect length, not what you expect the full length of the cylinder to be.
    Here is a quick video explaining why we ask for those three measurements. NOTE: This product does not include a hand pump or hose!! You may order one here. (The hose is included with the pump.) In compliance with state health laws, penis enlargement cylinders are not returnable, so size them carefully. IF you are having doubts about measurements please watch the video again. Remember, we CANNOT take returns on this product. Even if you do not try it on. 

Title

Go to Top